Solar-Powered IoT Device Kit

Product Highlights > Solar-Powered IoT Device Kit

            Solar-Powered IoT Device Kit
                    Infineon offers the world’s lowest-power energy harvesting power management IC for battery-free wireless sensor nodes
    

Infineon's solar-powered Internet of Things (IoT) device development kit provides an easy-to-use platform for the development of a solar-powered IoT device with Bluetooth® low energy (BLE) wireless connectivity. It includes the S6AE101A energy harvesting PMIC device. Also included in the kit is Infineon's EZ-BLE™ PRoC™ module (CYBLE-022001-00), a fully integrated BLE module solution that offers high flexibility for a wide variety of IoT device uses. A USB port is provided by Infineon's USB-UART LP bridge controller device (CY7C65213).

Features The solar-powered IoT device kit provides everything needed to develop a light-powered sensor node that transmits sensor data using BLE:
Firmware provided for the following applications: BLE beacon, transmitting data at 1.5 sec intervals with ambient light as low as 200 lx Wireless sensor node (WSN), transmitting data at 6 sec intervals with ambient light as low as 200 lx BLE communication with a PC supported through the included BLE-USB bridge that is pre-programmed with custom firmware for this kit Operation using energy harvested from light as low as 200 lx supported with the included solar cell module, which eliminates the need for a battery Use of a vibration energy harvesting device with an external diode bridge also supported (not included)		Reference schematic, BOM list, and layout data provided Expandable terminal on the energy harvesting motherboard provided, enabling support for the following: Reset button for EZ-BLE module JTAG header to debug EZ-BLE module Expandable sensor interface (I²C/UART/SPI/GPIO) DIP switch for future expansion (not mounted) LEDs for USB power and status

Solar-Powered IoT Device Kit

	Kuva	Manufacturer Part Number	Kuvaus	Aihealue	Käytetty mikropiiri/osa	Saatavana oleva määrä	Hinta	Näytä tiedot
		S6SAE101A00SA1002	EVAL BOARD FOR S6AE101A	Energian talteenotto	S6AE101A	0 - Immediate	See Page for Pricing	Näytä tiedot

Published: 2015-12-04

Related Product Highlight

IoT Bluetooth Module Portfolio Cypress’s portfolio of IoT Bluetooth modules is the industry’s broadest, providing certified, integrated & programmable solutions for a variety of IoT applications.

CYBLE-222014-01 EZ-BLE™ PRoC™ Bluetooth® 4.2 Module Infineon's CYBLE-222014-01 module is provided as a turnkey solution, including all necessary hardware required to use BLE communication standards.

PSoC® 4000S Prototyping Kit The PSoC 4 S-Series prototyping kit is a full featured programmer debugger with a PSoC 4000S device targeting mutual and self-capacitance designs

Related Product Training Modules

Bluetooth 4.2 Overview Cypress BLE solutions enables easy design of secure, high throughput wireless systems that are low power

Energy Harvesting PMIC Portfolio Cypress provides the world’s lowest-power, single-chip Energy Harvesting PMIC solution for tiny, solar-powered WSN IoT Devices

EZ BLE PRoC Module Introduction This is an introduction to the Cypress EZ BLE PRoC Module.

Solar-Powered IoT Device Kit