Asetukset
Nopea toimitus
Ilmainen toimitus
Incoterms
Maksutyypit
Markkinapaikan tuote
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Product List
The next step is to setup the decision logic in software. Remember 1/2Avcc needs to be expressed as a Hex conversion result. Also setup the GPIO P1.0 to turn the LED ON or OFF based on the conversion result.
PTM Published on: 2014-06-24
