Terasic

VEEK-MT2S Development Kit

Terasic's VEEK-MT2S development kit is an all-in-one embedded solution

Image of Terasic's VEEK-MT2S Development Kit Terasic's VEEK-MT2S development kit is a comprehensive design environment with everything embedded developers need to create processing-based systems. The VEEK-MT2S delivers an integrated platform including hardware, design tools, and reference designs for developing embedded software and hardware platforms in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT2S features a DE10-Standard development board targeting Altera Cyclone® V SX SoC FPGA, as well as a capacitive LCD multimedia color touch panel which natively supports five points multi-touch and gestures.

The all-in-one embedded solution offered on the VEEK-MT2S, in combination of a LCD touch panel and digital image module, provides embedded developers the ideal platform for multimedia applications with unparalleled processing performance. Developers can benefit from the use of FPGA-based embedded processing system such as mitigating design risk and obsolescence, design reuse, lowering bill of material (BOM) costs by integrating powerful graphics engines within the FPGA.

Features

DE10-Standard Development Board:
  • Cyclone V SE SoC - 5CSXFC6D6F31C6N
    • Dual-core ARM® Cortex®-A9 (HPS)
    • 110 K programmable logic elements
    • 5,761 Kbits embedded memory
    • 6 fractional PLLs
    • 2 hard memory controllers
  • Configuration sources
    • Serial configuration device - EPCS128 for the FPGA
    • On-board USB Blaster II (normal type B USB connector)
  • Memory device
    • 64 MB (32 M x 16) SDRAM for the FPGA
    • 1 GB (2 x 256 MB x 16) DDR3 SDRAM for the HPS
    • microSD card socket for the HPS
  • Peripherals
    • Two USB 2.0 host ports (ULPI interface with USB type A connector) on HPS
    • UART to USB (USB Mini B connector)
    • 10/100/1000 Ethernet
    • PS/2 mouse/keyboard
    • IR emitter/receiver
    • I2C multiplexer
  • Connectors
    • One HSMC expansion header (used for MTLC2)
    • One 40-pin expansion header
    • One 10-pin ADC input header
    • One LTC connector (one SPI master, one I2C bus, and one GPIO interface)
  • Display
    • 24-bit VGA DAC
    • 128 x 64 dots LCD module with backlight on HPS
  • Audio
    • 24-bit CODEC, line-in, line-out, and microphone-in jacks
  • Video input
    • TV decoder (NTSC/PAL/SECAM) and video-in connector
  • ADC
    • Sample rate: 500 KSPS
    • Channel number: 8
    • Resolution: 12 bits
    • Analog input range: 0 V to 4.096 V
  • Switches, buttons, and LEDs
    • 5 user keys (4 for the FPGA and 1 for the HPS)
    • 10 user switches for the FPGA
    • 11 user LEDs (10 for the FPGA and 1 for the HPS)
    • 2 HPS reset buttons (HPS_RESET_n and HPS_WARM_RST_n)
    • Six 7-segment displays
  • Sensors
    • G-sensor on HPS
  • Power
    • 12 VDC input
Capacitive Multi-Touch Screen Module:
  • LCD display
    • 7-inch TFT LCD with pixel resolution of 800*480
    • 16 million colors (8-bit RGB)
    • LED backlight
  • Capacitive multi-touch
    • Five points multi-touch
    • I2C interface
    • Gesture supporting
  • Gesture table
    • One point
    • Two point
  • 8-megapixel digital image sensor
    • 3,264 H x 2,448 V active pixels with Bayer color arrangement
    • Sensitivity 940 mV/Lux-sec
    • Gesture supporting
  • MPU9250 accelerometer features
    • Digital-output triple-axis accelerometer
    • Programmable full scale range of ±2 g, ±4 g, ±8 g, and ±16 g and integrated 16-bit
    • Self-test
  • Ambient light sensor
    • Precise illumination measurement under diverse lighting conditions
    • Programmable interrupts
    • 16-bit digital output with I2C fast-mode at 400 kHz
    • Programmable analog gain and integration time
    • 50 Hz to 60 Hz lighting ripple rejection
  • MPU9250 gyroscope features
    • Digital-output X-, Y-, and Z-axis angular rate sensors
    • User-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADCs
    • Self-test
  • MPU9250 magnetometer features
    • 3-axis silicon monolithic Hall effect magnetic sensor with magnetic concentrator
    • Wide dynamic measurement range and high resolution with lower current consumptions
    • Output data resolution of 14-bit (0.6 μT/LSB) or 16-bit (15 μT/LSB)
    • Full scale measurement range is ±4800 μT
    • Magnetometer normal operating current: 280 μA at 8 Hz repetition rate
    • Self-test function with internal magnetic source to confirm magnetic sensor operation on end products
Applications
  • Computers
  • Broadcast
  • Consumer
  • Industrial
  • Medical
  • Multimedia
  • Broadcast
  • Test and measurement
  • Wireless
  • Wireline
  • Automotive

VEEK-MT2S Development Kit

KuvaManufacturer Part NumberKuvausAlustaSisältöKäytetty mikropiiri/osaSaatavana oleva määrä HintaNäytä tiedot
VEEK-MT2S KIT W/ DE10-STANDARDK0161VEEK-MT2S KIT W/ DE10-STANDARDCyclone V SX SoC DE10-Standard VEEK-MT2SPiirilevyt, Kaapelit, Virtalähde, Lisävarusteet5CSXFC61 - Immediate$771.57Näytä tiedot
Published: 2017-06-13

Related Product Highlight

Power and Cost-Optimized FPGAs Altera MAX® and Cyclone® FPGA families are optimized for cost and low power consumption, delivering exceptional value for a wide range of applications.