ADM3057E Signal and Power Isolated CAN Transceiver

Product Highlights > ADM3057E Signal and Power Isolated CAN Transceiver

            ADM3057E Signal and Power Isolated CAN Transceiver
                    Analog Devices' transceiver supports data rates as high as 12 Mbps
    

Image of Analog Devices' ADM3057E Signal and Power Isolated CAN Transceiver Analog Devices' ADM3057E is a 3 kV_RMS isolated controller area network (CAN) physical layer transceiver with integrated isolated DC/DC converters and supports data rates as high as 12 Mbps. The part meets flexible data rate (CAN FD) requirements for operation to 5 Mbps and higher and comply with the ISO 11898-2:2016 standard.

The CAN FD compliant isolated transceiver up to 12 Mbps with isoPower® integrated, isolated DC/DC converter. This device passes EN 55022/CISPR 22 Class B emissions on a 2-layer board that reduces design complexity and is also compliant to 11898-2:2016 to 5 Mbps and future-proofed to 12 Mbps with 5.7 kV isolation.

Features

3 kV_RMS signal and power isolated CAN transceivers
isoPower integrated isolated DC/DC converter
VIO pin for 1.7 V to 5.5 V logic levels
ISO 11898-2:2016 compliant (CAN FD)
Data rates up to 12 Mbps for CAN FD
Low maximum loop propagation delay: 150 ns
Extended common-mode range: ±25 V
Bus fault protection: ±40 V on CANH and CANL pins

Low-power standby support remote wake request
Extra isolated signal for control (such as termination switches)
Passes EN 55022 Class B by 6 dB
Slope control for reduced EMI
Creepage and clearance: 7.8 mm minimum with 20-lead SOIC_W
High common-mode transient immunity: >75 kV/µs
Industrial operating temperature range: −40°C to +105°C

Applications

CANOpen, DeviceNet, and other CAN bus applications
Industrial automation

Process control and building control
Transport and infrastructure