Allegro MicroSystems

A1324/5/6 Linear Hall Effect Sensor ICs

Allegro MicroSystems' A1324/5/6 are miniature, general purpose, chopper-stabilized Hall effect linears

Image of Allegro MicroSystems' A1324/5/6 Linear Hall-Effect Sensor ICsAllegro's A1324/5/6 Hall effect linears are ratiometric sensors that provide a voltage output proportional to the applied magnetic field. The quiescent voltage output (Qvo) is 50 percent of the supply voltage.

The A1324/5/6 ICs are some of the best low noise, general purpose linear Hall effect sensors on the market. Additionally, they are extremely robust against EMI induced transients and will be available in an automotive grade surface mount package.

Features
  • Factory programmed sensitivities: 5.0, 3.125, and 2.5 mV/G
  • Low output noise
  • Enhanced EMC robustness
  • Temperature-stable quiescent voltage output and sensitivity 
  • Wide ambient temperature range: -40°C to +150°C
  • Miniature package option (LH)

A132x

KuvaManufacturer Part NumberKuvausSaatavana oleva määrä Hinta
SEN HALL EFFECT ANLG VOLT SOT23WA1324LLHLT-TSEN HALL EFFECT ANLG VOLT SOT23W9501 - Immediate$1.19Näytä tiedot
SEN HALL EFFECT ANLG VOLT SOT23WA1325LLHLT-TSEN HALL EFFECT ANLG VOLT SOT23W28437 - Immediate$1.19Näytä tiedot
SEN HALL EFFECT ANLG VOLT SOT23WA1326LLHLT-TSEN HALL EFFECT ANLG VOLT SOT23W10043 - Immediate$1.19Näytä tiedot
Published: 2012-06-29

Related Articles and Blogs

Vapauta merihirviö : Lisää mihin tahansa teollisuusjärjestelmään helposti tekoälyä Yhdistä Arm Cortex-M -mikrokontrollerit sekä Cartesiam.AI:n NanoEdge AI Studio, muodosta helposti AI- ja ML-sovelluksia teollisuusautomaatioon ja -ohjaukseen.
Contactless Sensing with the Hall Effect This article looks at the basis of operation of Hall Effect sensors and the use of linear and switched Hall Effect sensors in industrial automation applications.

Related Product Training Modules

Alternatives to Shunts for Current Sensing Comparison between shunt current measurement and magnetic current measurement. What are the advantages and disadvantages of both technologies and where to use which technique.