MP2760 Evaluation Kit

Product Highlights > MP2760 Evaluation Kit

            MP2760 Evaluation Kit
                    MPS’ evaluation kit is designed for the MP2760, a buck-boost narrow-voltage DC (NVDC) charger IC
    

Image of MPS MP2760 Evaluation Kit MPS' EVKT-MP2760 is an evaluation kit for the MP2760. The board is designed to demonstrate the capabilities of the MP2760, a buck-boost narrow-voltage DC (NVDC) charger IC for battery packs with 1 to 4 cells in series.

The device accepts a wide 4 V to 22 V input voltage (V_IN) range to charge the battery and power the load connected on the SYS pin. It also supplies a wide 3 V to 21 V voltage range at the IN pin when source mode is enabled, which is compliant with USB power delivery (PD) specifications.

Features

Fully integrated buck-boost charger with low on-resistance (R_DS(ON)) power MOSFETs for 1 to 4 cells in series battery pack
Integrated N-Channel MOSFET driver for narrow-voltage DC (NVDC) power path control
Integrated N-Channel MOSFET driver for input power pass-through
Operating input voltage (V_IN): 4 V to 22 V
Reverse output voltage (V_OUT): 3 V to 21 V with 20 mV/step
Input current (I_IN) limit: up to 6 A with 50 mA/step
Charge current: up to 6 A with 50 mA/step
Output current (I_OUT): up to 6 A with 50 mA/step

3.4 V/cell to 4.67 V/cell battery-full voltage with 0.5% accuracy
Serial interface host control interface to support flexible parameter setting and status reporting
Integrated 10-bit analog-to-digital converter (ADC) for voltage, current, and temperature monitoring
Analog output pin to monitor charge current
Output short-circuit protection (SCP) in source mode
Configurable JEITA for battery temperature protection
Thermal regulation and thermal shutdown

Applications