SXT224 Series Datasheet

@SUNTSU SX 24 BAA4 0.0 E ELECYKODE Amusmsm (acwoM vuswy ,. M ,1 15m 1 QB Rum!» 254m mm k—fi n 57m;
SXT224 Series
Ceramic SMT 4 Pad Crystal
2.5mm x 2.0mm
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Specifications are subject
to change without notice.
www.suntsu.com Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
SXT 22 4 18 A A 48 - 20.000M
S : Series
8-20 : 8pF - 20pF
SUNTSU CRYSTAL
2.5mm x 2.0mm
4 PAD
LOAD CAPACITANCE
OPERATING TEMPERATURE RANGE**
• ±10ppm/±10ppm (Tolerance/Stability)
Available
• Ultra-Miniature Package
• AT-Cut Fundamental
• Tape and Reel
• Bluetooth
• PCMCIA
• Wireless Applications
• Computers and Modems
• High Density Applications
Features Applications
Part Numbering Guide
COMPLIANT
FREQUENCY TOLERANCE
FREQUENCY
FREQUENCY STABILITY
Frequency Range
Operating Temperature
Frequency Tolerance at +25ºC
Storage Temperature
Frequency Stability vs. Op Temp
Load Capacitance
Frequency Stability vs. Aging
Shunt Capacitance
Drive Level
AT-Cut Fundamental.
See part numbering guide for options.
See part numbering guide for options.
See part numbering guide for options.
First year @ +25ºC.
See part numbering guide for options.
50
MHz
°C
ppm
°C
ppm
pF
ppm
pF
µW
66
+85
+10
+125
20
+2
5
100
12
-40
-10
-40
-10
8
-2
A : ±50ppm
B : ±30ppm
C : ±25ppm
D : ±20ppm
E : ±15ppm
F : ±10ppm
A : ±50ppm
B : ±30ppm
C : ±25ppm
D : ±20ppm
E : ±15ppm
F : ±10ppm*
07 : 0°C - +70°C
16 : -10°C - +60°C
17 : -10°C - +70°C
27 : -20°C - +70°C
38 : -30°C - +85°C
48 : -40°C - +85°C
MHz
16.000MHz ~ 19.999MHz
Insulation Resistance
20.000MHz ~ 29.999MHz
30.000MHz ~ 39.999MHz
12.000MHz ~ 15.999MHz
40.000MHz ~ 66.000MHz
AT-Cut Fundamental
@ 100VDC ± 15V.
AT-Cut Fundamental
AT-Cut Fundamental
AT-Cut Fundamental
AT-Cut Fundamental
Ω
MΩ
Ω
Ω
Ω
Ω
100
80
60
120
50
500
+10
ESR -
Cage Code: 4GUT4
To customize your parameters contact a Suntsu representative.
* For frequency stability option F contact a Suntsu representative. ** For operating temperatures of -55-125°C a Suntsu representative.
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
Outline Drawing & Recommended Landed Pattern
TypicalUnitsElectrical Parameters Maximum RemarksMinimum
— §SUNTSU Frequency in MHz _¢_ Line 1: XX.XXX Line 2: S FYWW Year Manufacturing Identifier “no.1 ”‘01 N 0’ fl 0. m manila 05.10 / wzo.u:o.5 ‘ , 22:0.5 013.0%.5 0.65t0.1
SXT224 Series
Ceramic SMT 4 Pad Crystal
2.5mm x 2.0mm
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Specifications are subject
to change without notice.
www.suntsu.com Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
Mechanical Shock
Vibration
MIL-STD-202, Method 213, Condition B
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 1010, Condition B
MIL-STD-883, Method 1014, Condition A
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
MIL-STD-883, Method 1014, Condition C
Resistance to Solvents MIL-STD-202, Method 215
MIL-STD-883, Method 1004
Solderability MIL-STD-883, Method 2003
J-STD-020, MSL 1
Temperature Cycling
Fine Leak Test
Gross Leak Test
Moisture Resistance
Moisture Sensitivity
Tp (Time At 260°C. 20-40 Sec)
TI (Time Above 217°C.
60-150Sec)
Ts (Preheat Time.
60-180Sec)
T 25°C to Peak (480Sec Max)
Rup (Ramp Up, 3°C/Sec Max)
Rdn (Ramp Down,
6°C/Sec Max)
Temperature (°C)
260
217
200
150
Time (sec)
Reflow Profile & Part Marking
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
Tape And Reel Dimensions
3,000pcs / Reel
Environmental Specifications Mechanical Specifications