142-5404-106 Assem Instr Datasheet by Cinch Connectivity Solutions Johnson

cinch CONNECTIVITV SOLUTIONS o be‘ group JOI-INSON EXPANSION (AP ; CRIMP SLEEVE r [ fCONNECTOR BODY JACKEI mu) CRIMPSLEEVE INSULATION CENTER common ,2st (5,35) .385 55 19,78) 65) some»: REAR ACCESS PORT C m\/ CONNECTOR 50m J / EXPANSION CAP CR'MP _ [CONNECTOR mm
243
© 2017 Cinch Connectors, Inc.
ccsjai 02.17
Cinch Connectivity Solutions Waseca
299 Johnson Avenue SW, Suite 100
Waseca, MN 56093 USA
+1 507.833.8822
inquiry@cinch.com
cinch.com
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick braid
or center conductor. When stripping LMR-100
low loss cable, remove foil back to where cable
jacket is stripped. A wire stripper of correct size is
recommended for this step. Twist stranded center
conductor into tight bundle and tin (optional). Slide
crimp sleeve onto cable as shown.
3. Flare braid and slide cable into body making certain
that the cable insulation bottoms on center contact.
Solder center conductor to contact through the
rear access port. Use a minimum amount of solder
for a full fillet joint. .020 (0.51) diameter solder is
recommended.
4. Arrange braid uniformly around crimp stem. Slide
crimp sleeve over braid and crimp securely using
recommended crimp tool. Place expansion cap in
access port and seat with .187 (4.75) diameter flat
punch. Shrink heat shrink tubing over crimp sleeve if
applicable.
SMA Crimp Type Right Angle Plugs for Flexible Cable
JOI-INSOW cinch CONNECTIVITY $0LUT|ONS o be‘ group
244
© 2017 Cinch Connectors, Inc.
ccsjai 02.17
Cinch Connectivity Solutions Waseca
299 Johnson Avenue SW, Suite 100
Waseca, MN 56093 USA
+1 507.833.8822
inquiry@cinch.com
cinch.com
SMA Crimp Type Right Angle Plugs for Flexible Cable (cont’d from last page)
Cable Group Part No. Crimp Hex
RG-316/U, 161, 174, 188; LMR-100 141-0403-102 .128 (3.25)
RG-316 DS, 188 DS 141-0404-112 .151 (3.83)
RG-58/U, 141, 303 141-0407-102 .213 (5.41)
RG-55/U, 142, 223, 400 141-0408-102 .213 (5.41)
RG-178/U, 196 142-0402-101
142-0402-106
.105 (2.67)
.105 (2.67)
RG-316/U, 161, 174, 188; LMR-100 142-0403-101
142-0403-106
.128 (3.25)
.128 (3.25)
RG-316 DS, 188 DS 142-0404-101
142-0404-106
.151 (3.83)
.151 (3.83)
RG-58/U, 141, 303 142-0407-101
142-0407-106
.213 (5.41)
.213 (5.41)
RG-55/U, 142, 223, 400 142-0408-101
142-0408-106
.213 (5.41)
.213 (5.41)
RG-179/U, 187 142-0433-101
142-0433-106
.128 (3.25)
.128 (3.25)
RG-316/U, 161, 174, 188; LMR-100 142-4403-101
142-4403-106
.128 (3.25)
.128 (3.25)
RG-316 DS, 188 DS 142-4404-101
142-4404-106
.151 (3.83)
.151 (3.83)
RG-58/U, 141, 303 142-4407-101
142-4407-106
.213 (5.41)
.213 (5.41)
RG-55/U, 142, 223, 400 142-4408-101
142-4408-106
.213 (5.41)
.213 (5.41)
RG-316/U, 161, 174, 188; LMR-100 142-5403-101
142-5403-106
.128 (3.25)
.128 (3.25)
RG-316 DS, 188 DS 142-5404-101
142-5404-106
.151 (3.83)
.151 (3.83)
RG-58/U, 141, 303 142-5407-101
142-5407-106
.213 (5.41)
.213 (5.41)
RG-55/U, 142, 223, 400 142-5408-101
142-5408-106
.213 (5.41)
.213 (5.41)
RG-316/U, 188, 174 142-9403-101 .128 (3.25)
RG-316 DS, 188 DS 142-9404-101 .151 (3.83)
RG-58/U, 141 142-9407-101 .213 (5.41)