3211929 Datasheet by Phoenix Contact

[923% 4 046356 495950
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page1/17
Feed-through terminal block-PT 6-TWIN-3211929
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Feed-through terminal block, Connection method:Push-in connection, Cross section: 0.5 mm²-10
mm², AWG:20-8, Width:8.2 mm, Height:42.2 mm, Color:gray, Mounting type:NS 35/7.5,NS
35/15
Key commercial data
Packing unit 0
Minimum order quantity 1
GTIN
Custom tariff number 85369010
Country of origin POLAND
Technical data
General
Number of levels 1
Number of connections 3
Color gray
Insulating material PA
Inflammability class according to UL 94 V0
Dimensions
Width 8.2 mm
Length 74.2 mm
Height 42.2 mm
Height NS 35/7,5 43.5 mm
Height NS 35/15 51 mm
Technical data
Maximum load current 52 A (with 10 mm2 conductor cross section)
Rated surge voltage 8 kV
Pollution degree 3
Surge voltage category III
Insulating material group I
PHIEHIX ON'I'ACI'
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page2/17
Feed-through terminal block-PT 6-TWIN-3211929
Technical data
Technical data
Connection in acc. with standard IEC 60947-7-1
Nominal current IN41 A
Nominal voltage UN1000 V
Open side panel ja
Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection guaranteed
Finger protection guaranteed
Surge voltage test setpoint 9.8 kV
Result of surge voltage test Test passed
Power frequency withstand voltage setpoint 2.2 kV
Result of power-frequency withstand voltage test Test passed
Checking the mechanical stability of terminal points (5 x conductor
connection) Test passed
Bending test rotation speed 10 rpm
Bending test turns 135
Bending test conductor cross section/weight 0.5 mm² / 0.3 kg
Bending test conductor cross section/weight 6 mm2 / 1.4 kg
Bending test conductor cross section/weight 10 mm² / 2 kg
Result of bending test Test passed
Conductor cross section tensile test 0.5 mm²
Tractive force setpoint 20 N
Conductor cross section tensile test 6 mm²
Tractive force setpoint 80 N
Conductor cross section tensile test 10 mm²
Tractive force setpoint 90 N
Tensile test result Test passed
Tight fit on carrier NS 35
Setpoint 5 N
Result of tight fit test Test passed
Requirements, voltage drop ≤ 3.2 mV
Result of voltage drop test Test passed
Temperature-rise test Test passed
Conductor cross section short circuit testing 6 mm²
Short-time current 0.72 kA
Conductor cross section short circuit testing 10 mm²
Short-time current 1.2 kA
Short circuit stability result Test passed
Ageing test for screwless modular terminal block temperature
cycles 192
Result of aging test Test passed
Proof of thermal characteristics (needle flame) effective duration 30 s
Result of thermal test Test passed
Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
PHIEHIX ON'I'ACI'
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page3/17
Feed-through terminal block-PT 6-TWIN-3211929
Technical data
Technical data
Test spectrum Service life test category 1, class B, on vehicle body
Test frequency f1 = 5 Hz to f2 = 150 Hz
ASD level 1.857 (m/s2)2/Hz
Acceleration 0.8 g
Test duration per axis 5 h
Test directions X-, Y- and Z-axis
Oscillation, broadband noise test result Test passed
Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
Shock form Half-sine
Acceleration 5 g
Shock duration 30 ms
Number of shocks per direction 3
Test directions X-, Y- and Z-axis (pos. and neg.)
Shock test result Test passed
Temperature index, insulating material (DIN EN 60216-1 (VDE
0304-21)) 130 °C
Static insulating material application in cold -60 °C
Connection data
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 10 mm²
Conductor cross section AWG/kcmil min. 20
Conductor cross section AWG/kcmil max 8
Conductor cross section stranded min. 0.5 mm²
Conductor cross section stranded max. 6 mm²
Min. AWG conductor cross section, stranded 20
Max. AWG conductor cross section, stranded 10
Conductor cross section stranded, with ferrule without plastic
sleeve min. 0.5 mm²
Conductor cross section stranded, with ferrule without plastic
sleeve max. 6 mm²
Conductor cross section stranded, with ferrule with plastic sleeve
min. 0.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve
max. 6 mm²
2 conductors with same cross section, stranded, TWIN ferrules
with plastic sleeve, min. 0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules
with plastic sleeve, max. 1.5 mm²
Connection method Push-in connection
Stripping length 12 mm
Internal cylindrical gage A5
PHENIX CONTACT
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page4/17
Feed-through terminal block-PT 6-TWIN-3211929
Classifications
ETIM
ETIM 4.0 EC000897
ETIM 5.0 EC000897
UNSPSC
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
eCl@ss
eCl@ss 4.0 27141120
eCl@ss 4.1 27141120
eCl@ss 5.0 27141120
eCl@ss 5.1 27141120
eCl@ss 6.0 27141120
eCl@ss 7.0 27141120
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / cULus Recognized
Ex Approvals
Approvals submitted
Approval details
UL Recognized
B C
mm²/AWG/kcmil 20-8 20-8
Nominal current IN 40 A 40 A
Nominal voltage UN 600 V 600 V
INN
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page5/17
Feed-through terminal block-PT 6-TWIN-3211929
Approvals
cUL Recognized
B C
mm²/AWG/kcmil 20-8 20-8
Nominal current IN 40 A 40 A
Nominal voltage UN 600 V 600 V
cULus Recognized
Accessories
Accessories
Assembly
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35
mm, length: 2000 mm
DIN rail-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail 35 mm (NS 35)
DIN rail-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail 35 mm (NS 35)
[928m
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page6/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
DIN rail-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, material: Aluminum, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35
mm, length: 2000 mm
DIN rail-NS 35/15 UNPERF 2000MM-1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
[923m
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page7/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
DIN rail-NS 35/15 WH PERF 2000MM-0806602
DIN rail 35 mm (NS 35)
DIN rail-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35
mm, length 2000 mm
DIN rail-NS 35/15 ZN PERF 2000MM-1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
ul'fifib
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page8/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Spacer plate-DP PS-8-3036741
Spacer plate, Color:red
End clamp-E/UK-1201442
End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail
End clamp-E/UK 1-1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color:
gray
End clamp-CLIPFIX 35-3022218
Snap-on end bracket, for 35 mm NS 35/7.5 or NS 35/15 DIN rail, can be fitted with Zack strip ZB 8 and ZB
8/27, terminal strip marker KLM 2 and KLM, width: 9.5 mm, color: gray
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page9/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
End clamp-CLIPFIX 35-5-3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, can be fitted with ZB 5 and ZBF 5
zack marker strip, KLM 2, KLM3, and KML3L terminal strip marker, parking option for FBS...5, FBS...6, KSS
5, KSS 6, width: 5.15 mm, color: gray
Bridges
Plug-in bridge-FBS 10-8-3030323
Plug-in bridge, Number of positions:10, Color:red
Plug-in bridge-FBS 5-8-3030310
Plug-in bridge, Number of positions:5, Color:red
Plug-in bridge-FBS 4-8-3030307
Plug-in bridge, Number of positions:4, Color:red
Plug-in bridge-FBS 3-8-3030297
Plug-in bridge, Number of positions:3, Color:red
fl‘n.‘luffm
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page10/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
Plug-in bridge-FBS 2-8-3030284
Plug-in bridge, Number of positions:2, Color:red
Plug-in bridge-FBS 6-8-3032470
Plug-in bridge, Number of positions:6, Color:red
Reducing bridge-RB ST 6-1,5/S-3213250
Reducing bridge, Number of positions:2, Color:red
Switching jumper-SB-MER 2-8-3000587
Switching jumper, Length:24.7 mm, Width:16.4 mm, Height:47.42 mm, Number of positions:2,
Color:gray/orange
Switching jumper-SB-MER 3-8-3000588
Switching jumper, Length:24.7 mm, Width:24.6 mm, Height:47.42 mm, Number of positions:3,
Color:gray/orange
Switching jumper-SB-MER 4-8-3000589
Switching jumper, Length:24.7 mm, Width:32.8 mm, Height:47.42 mm, Number of positions:4,
Color:gray/orange
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page11/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
Plug-in bridge-FBSRH 2-8-3033802
Plug-in bridge, Number of positions:2, Color:red
Plug-in bridge-FBSRH 3-8-3033803
Plug-in bridge, Number of positions:3, Color:red
Plug-in bridge-FBSRH 4-8-3033804
Plug-in bridge, Number of positions:4, Color:red
Covers
End cover-D-PT 6-TWIN-3211508
End cover, Length:72.4 mm, Width:2.2 mm, Color:gray
Marking
Zack marker strip-ZB 8:UNBEDRUCKT-1052002
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker
groove, For terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
.///
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page12/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
Zack marker strip-ZB 8 CUS-0825011
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Marker for terminal blocks-UC-TM 8-0818072
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, Bluemark,
Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 8.2 mm, Lettering field: 7.6 x
10.5 mm
Marker for terminal blocks-UC-TM 8 CUS-0824597
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications,
Mounting type: Snap into tall marker groove, For terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Marker for terminal blocks-UCT-TM 8-0828740
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: Thermomark C+, Thermomark C,
BLUEMARK CLED, Bluemark, Mounting type: Snap into tall marker groove, For terminal block width: 8.2
mm, Lettering field: 7.6 x 10.5 mm
Marker for terminal blocks-UCT-TM 8 CUS-0829616
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications,
Mounting type: Snap into tall marker groove, For terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Zack Marker strip, flat-ZBF 8:UNBEDRUCKT-0808781
Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat
marker groove, For terminal block width: 8 mm, Lettering field: 5.15 x 8.15 mm
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page13/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
Zack Marker strip, flat-ZBF 8 CUS-0825030
Zack Marker strip, flat, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting
type: Snap into flat marker groove, For terminal block width: 8 mm, Lettering field: 5.15 x 8.15 mm
Marker for terminal blocks-UC-TMF 8-0818137
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, Bluemark,
Plotter, Mounting type: Snap into flat marker groove, For terminal block width: 8.2 mm, Lettering field: 7.6 x
5.1 mm
Marker for terminal blocks-UC-TMF 8 CUS-0824654
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications,
Mounting type: Snap into flat marker groove, For terminal block width: 8.2 mm, Lettering field: 7.6 x 5.1 mm
Marker for terminal blocks-UCT-TMF 8-0828748
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: Thermomark C+, Thermomark C,
BLUEMARK CLED, Bluemark, Mounting type: Snap into flat marker groove, For terminal block width: 8.2
mm, Lettering field: 7.4 x 4.7 mm
Marker for terminal blocks-UCT-TMF 8 CUS-0829672
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications,
Mounting type: Snap into flat marker groove, For terminal block width: 8.2 mm, Lettering field: 7.4 x 4.7 mm
mm
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page14/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
Marker for terminal blocks-TMT (EX9,5)R-0828295
Marker for terminal blocks, Roll, white, Unlabeled, Can be labeled with: Thermomark R, Thermomark X,
Thermomark S, Mounting type: Snap into universal marker groove, Snap into flat marker groove, Lettering
field: 9.5 x 50000 mm
Plug/Adapter
Reducing bridge-RB ST 6-(2,5/4)-3030860
Reducing bridge, Number of positions:2, Color:red
Test plugs-MPS-MT-0201744
Test plugs
Insulating sleeve-MPS-IH WH-0201663
Insulating sleeve, Color:white
Insulating sleeve-MPS-IH RD-0201676
Insulating sleeve, Color:red
[flc’fifirfl'é
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page15/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
Insulating sleeve-MPS-IH BU-0201689
Insulating sleeve, Color:blue
Insulating sleeve-MPS-IH YE-0201692
Insulating sleeve, Color:yellow
Insulating sleeve-MPS-IH GN-0201702
Insulating sleeve, Color:green
Insulating sleeve-MPS-IH GY-0201728
Insulating sleeve, Color:gray
Insulating sleeve-MPS-IH BK-0201731
Insulating sleeve, Color:black
Test plugs-PS-5/2,3MM RD-3038723
Test plugs, Color:red
[923m
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page16/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
Test plugs-PS-6/2,3MM RD-3038736
Test plugs, Color:red
Test adapter-PS-8/2,3MM RD-3048564
Test adapter, Color:red
Test adapter-PAI-4-N GY-3032871
Test adapter, Color:gray
Test adapter-PS-8-3031005
Test adapter, Color:red
Software
Software-CLIP-PROJECT ADVANCED-5146040
Multilingual software for easy planning of Phoenix Contact on DIN rails together with the integrated
TRABTECH-select software module for planning comprehensive surge protection concepts.
Software-CLIP-PROJECT PROFESSIONAL-5146053
Multi-lingual software for terminal strip project planning. A marking module allows professional labeling of
markers and labels for marking terminal blocks, conductors, cables and devices. The additionally integrated
software module TRABTECH-select for planning comprehensive surge protection concepts.
https://www.phoenixcontact.com/us/produkte/3211929
17.01.2013Page17/17
Feed-through terminal block-PT 6-TWIN-3211929
Accessories
Tools
Screwdriver-SZF 2-0,8X4,0-1204520
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100
mm, 2-component grip, with non-slip grip
End clamp-E/NS 35 N-0800886
End clamp, width: 9.5 mm, color: gray
Drawings
Circuit diagram
© Phoenix Contact 2012 - all rights reserved
http://www.phoenixcontact.com